How to Improve the Performance of a Dell Mini 10 Battery?
The process of charging a battery for Dell Mini 10 should not be difficult. Simply plug your laptop into the power supply socket and wait until it is fully charged before you unplug it. The time taken before your mini 10 batteries is fully charged depends on the strength of your battery, which in turn depends on the manufacturer and the age of the battery. How long the battery lasts after a charging session also depends on a number of factors including age and manufacture. However, there are several ways of improving the performance of your batteries.
For a new Dell Mini 10 battery, it is important to fully cycle the battery before you use it. A “cycle” equals one full charge + one complete discharge. When you first buy a new Dell mini 100, do not turn it on, it will not work. Plug the mini laptop into the power supply socket and leave it overnight or for 12 hours. However, the battery needs between 8 and 10 charge/recharge cycles before it reaches its full capacity. Before this, the battery will be working below capacity. Unfortunately, if you do not allow a new battery to fully charge (for 12 hours), chances are that it may never be able to achieve full capacity.
It is important to understand that fully discharging a Dell Battery before fully recharging it is not helpful in improving battery life; instead, it could be harmful to the battery. Fully discharging a battery should be avoided as it stresses a battery and could therefore destroy it. The best way, according to expert guidance, is to discharge to levels of about 20% to 30% before fully recharging. Laptops have a gauge for determining the level of charge in the battery. However, the sensors become weak and inaccurate over time partly because of the charge/discharge cycles. This means that a sensor could read 50% while the accuracy level of charge in the battery is only 30%. For this reason, you never have to wait until the battery goes flat before recharging.
Then there is the question removing the battery when the Dell Mini 10 Adapter Charger is plugged in to the A/C supply… does it harm a battery? Well it does but not always. Removing a fully charged battery from the laptop while the A/C is still plugged has no effect on the battery as a battery usually stops charging once it is fully (100%) charged and the current is bypassed directly to the laptop. Removing the battery before it is fully charged is what is considered harmful.
Article Source: For more information about laptop Charger or Dell Mini 10 Battery, please go to https://www.notebookbatteries.co.nz/dell-batteries-57587/dell-inspiron-mini-10-battery.html