Maintenance and Care Tips for Your HP Mini 1000 Laptop Battery
An original battery for HP Mini 1000 is a Li-polymer battery that comes with a voltage of 11.1V, a capacity of 23000mAh and has a net weight of 198g. The battery measures 142.7 by 87.4 by 9.75mm. he HP Mini 1000 battery fits machine models: HP Mini 1000, Compaq Mini 700, HP Mini 10.2 all series, HP Mini 1014, HP Mini 1050, HP Mini 1001, HP Mini 1035 NR, and HP Mini 1010NR laptops. All the HP Mini batteries have a 1 year warranty and a 30-day money back guarantee if purchased from legitimate an offline or online store. The batteries have high power transmission capability and low internal resistance.
The HP Mini 1000 battery has a double IC PBC Protector and over 500 complete discharge & charge times/cycles. The internal circuit board has chips which allow it to directly communicate with the machine to monitor its performance, temperature and output voltage. The battery is designed to give the HP Mini laptop a more accurate and complete fuel gauge capability that helps in determining the number of battery run-time is left prior to the next re-charge is required. The HP Mini 1000 battery compatible part number include: HP 493529-371, HP HSRNN-157C and HP HSTNN-OB80.
How can you extend the life of your Li-polymer HP Mini 1000 laptop battery?
The HP battery requires frequent calibration where you are supposed to periodically carry out a full discharge after every 30 full charges, so as to enhance meter accuracy. Battery calibration is very important, but it should only be done based on the results shown in HP Support Manual. Under normal usage, it is recommended that you calibrate the battery at least once every 2-3 months. But if your battery is rarely discharged, then the calibration ought to be done once a month instead.
Refrain from leaving your HP Mini 110 battery plugged into an electric power source long after you have completed using your laptop. This is because doing so frequently maintains an air of electricity (a condition normally referred to as “drought”) which has serious consequences like causing damage to the interior components of the HP charger rendering it useless.
If the rechargeable battery fails to charge, then it could be as a result of the HP Mini 1000 adapter failure, a battery failure or a system board failure. This will force you to troubleshoot the power supply, the system board and the battery in order to correct the failure. The failure may also be as a result of excessive heat – an enemy of the all HP Mini battery models. Remember that it is very possible for the temperature in a car to rise to 50F in just one hour, in fact in some cases in may reach 140F.
Keep the battery clean by cleaning it with a soft cloth, a pencil eraser or rubbing it with alcohol.
Article Source: For more information about laptop adapter or HP Mini 1000 Laptop Battery, please go to https://www.notebookbatteries.co.nz/hp-batteries-7950/hp-mini-1000-battery.html